How to Set and Review Credit Limits for Trade Customers

Size a trade customer's credit limit from real needs and finances, then review, raise or cut it on evidence, with worked numbers and clear triggers.

· 14 min read · TradeRepute team

A credit limit is the most important number in a trade account, and it is often the least thought through. Someone in sales asks for a figure. Someone in finance picks one that feels safe. Two years later the customer is buying three times as much, the limit has been raised by phone call four times, and nobody can say why it sits where it does.

This guide is about that number. It shows how to set a first credit limit for a trade customer, how to check it against more than one method, and how to review it, raise it or cut it as the account changes. It is written for exporters, distributors, wholesalers and trading companies that sell on open account, in any country.

If you are still deciding whether a new buyer should get credit at all, start with our guide to trade credit underwriting for a new buyer. That post covers identity, ownership, sanctions and payment checks. This one picks up at the point where the answer is "yes, but how much?"

What a credit limit is, and what it is not

A credit limit is the most you are willing to have owed to you by one customer at any one time. It is a ceiling on risk, not a sales target and not a promise. The US credit managers' association NACM, in its note on nine methods for establishing credit limits, puts it this way: the limit places a ceiling on the orders a customer can place and does not promise to extend credit further.

Three numbers get mixed up in most credit teams:

  • Credit limit: the approved ceiling.
  • Payment terms: how long the customer has to pay each invoice, such as net 30 or net 60.
  • Exposure: what the customer actually owes you right now, plus what you have shipped but not yet invoiced, plus what you have made or ordered for them that you could not easily sell to anyone else.

Exposure is the number that can hurt you. A limit only works if it is compared with real exposure, not just with open invoices in the ledger. If you make goods to order, a half-finished production run for one customer is risk you already carry, even though no invoice exists yet.

Terms and limits also move together. NACM notes that financial exposure is greater when credit terms are longer. A customer buying the same amount each month on net 90 will owe you about three times what it would owe on net 30. If you lengthen terms, you have raised the risk on the account even if the limit stays the same.

Step 1: Work out what the customer actually needs

Start with the trade, not the risk. A limit that is too small blocks normal orders, frustrates sales and pushes the customer to a competitor. A limit that is far too big gives a weak customer room to run up debt with you.

The needs-based method sizes the limit to expected buying. A common form, used in guides such as this credit limit framework from EFILOS, is:

Expected monthly purchases x expected days to pay / 30 x a buffer of 1.2 to 1.5

Expected days to pay is not the same as your terms. It is your terms plus the number of days late customers like this usually pay. The buffer covers lumpy orders and the overlap between one invoice being paid and the next shipment going out.

A simple example. A buyer expects to order about $30,000 a month on net 45 terms. Customers in that market usually pay about 10 days late, so expected days to pay is 55.

  • $30,000 x 55 / 30 = $55,000 of normal exposure
  • $55,000 x 1.3 buffer = about $71,500
  • Round to a limit of $70,000 or $75,000

Two warnings. First, sales forecasts tend to be high, especially for new accounts. Use the customer's real order history once you have a few months of it. Second, a needs-based number tells you nothing about whether the customer can pay. It is a starting point, not an answer.

Step 2: Check it against what the customer can support

Next, ask how much credit the customer's own finances can carry. There are several ways to do this, and most credit teams use more than one.

Net worth

Credit insurer Allianz Trade, in its guide to B2B customer credit limits, gives a benchmark of 10 percent of the customer's net worth, meaning total assets minus total liabilities. Some credit teams use a stricter version based on tangible net worth, which removes goodwill and other intangible assets, and set the limit at 5 to 10 percent of that figure. The idea behind both is that no single supplier should carry a large share of what the customer is worth.

Working capital

Working capital is current assets minus current liabilities. It shows how much short-term money the customer has to cover short-term bills, which is what your invoice is. A company with high net worth but negative working capital may own valuable buildings and still be unable to pay next month.

What other suppliers give

Trade references tell you the limits and terms other suppliers already give this customer, and how it pays them. If three suppliers give limits of $20,000 to $40,000 and you are asked for $150,000, you would be the largest creditor by a wide margin. That needs a reason. For a call script and how to read days beyond terms, see how to check trade references before you offer net terms.

A credit report

Where a business credit report exists, it may show a suggested limit. Treat it as a ceiling, not a target. The agency does not know your terms, your margin or how much of your sales this customer will be.

Your own loss limit

Finally, turn the question around. How much could you lose on this one customer without serious damage to your business? That figure caps every account, however strong. It matters most when a few customers make up most of your sales.

Step 3: Pick one number and write down why

You now have several figures. They will not match. Allianz Trade suggests calculating its three methods (trade reference, net worth and needs-based) and taking the average. Many credit teams are more careful and take the lowest, then compare it with the needs-based number.

A practical rule:

  • If the needs-based number is below the "can support" numbers, use the needs-based number. You are giving the customer what it needs, and its finances can carry it.
  • If the needs-based number is above the "can support" numbers, use the lower figure and close the gap with safer terms, security or a smaller first order.
  • If two methods differ by more than about two times, stop and find out why. Usually either the sales forecast is optimistic or the financial statements are old.

Write the method and the inputs into a short credit note: which figures you used, where they came from, the limit you set and the date you will review it. A limit nobody can explain is a limit nobody can defend when the account goes bad.

Step 4: Adjust for the trade around the customer

The same customer can deserve a different limit depending on what you sell and where.

  • Country risk. Payment delays, currency controls or political events can stop a good buyer from paying. Lower limits in markets where it is hard to collect or hard to move money out.
  • Currency. If you invoice in a currency the customer does not earn in, a sharp move in the exchange rate can turn a fair limit into a heavy one for them.
  • Product. Standard goods can sometimes be resold if an order is cancelled. Custom goods usually cannot. Count work in progress for custom orders as exposure.
  • Seasonality. Some buyers order most of their year in a few months. A limit sized to average monthly buying will block the peak. Consider a higher temporary limit with an end date, rather than a permanent increase.
  • Concentration. If one customer is a large share of your sales, its limit is also a measure of how much of your own business you are betting.

Step 5: Use security to close the gap

When the customer needs more than its finances support, you do not have to choose between a full limit and no deal. You can split the risk.

  • Letters of credit. The US International Trade Administration's page on letters of credit describes an LC as a commitment by the buyer's bank to pay once the exporter ships and presents the required documents. ITA recommends them when the buyer's credit is unacceptable or not available, for new or less-established relationships, and when extended terms are requested. You can ship part of the volume on LC and part on open account.
  • Export credit insurance. ITA's page on export credit insurance says short-term policies provide 90 to 95 percent coverage against commercial and political risks, and that most multi-buyer policies cost less than 1 percent of insured sales. The insurer sets its own limit on each buyer. Coface, in its comparison of credit insurance and letters of credit, notes that receivables are only covered up to that limit, and that cover may change if the insurer reassesses the risk. Keep your own limit at or below the insured limit unless you have decided to carry the extra risk yourself.
  • Deposits and part payments. A 20 or 30 percent deposit lowers the amount at risk on each order.
  • Guarantees. A parent company or personal guarantee can support a limit for a small or young buyer. Have a lawyer in the relevant country review the wording.

NACM lists secured versus unsecured credit as one of its nine limit methods for a reason. Security changes how much you can safely offer.

Step 6: Make the limit work in daily operations

A limit that lives in a spreadsheet does not protect you. It has to stop orders.

  • Set the limit in your order or ERP system so new orders above the remaining room are held automatically.
  • Count open orders and shipped-but-not-invoiced goods, not only open invoices.
  • Decide who can release a held order, up to what amount, and how they record it.
  • Tell the customer its limit and terms in writing, along with what happens when it is reached.

Your credit terms should also say that you can change or withdraw a limit. Check the wording with a lawyer in your market, because what you can do once an order is accepted depends on your contract and local law.

Step 7: Review limits on a schedule and on triggers

Allianz Trade puts it simply: credit limits are never set in stone and must be reviewed regularly. Two kinds of review work together.

Scheduled reviews. Tie the timing to the size of the account. For example, review your largest accounts every six months and smaller ones once a year. At each review, update financials if you can get them, check recent payment behaviour, refresh references and compare the limit with actual exposure over the last year.

Trigger reviews. Some events should force a review straight away:

  • Payments start arriving later than usual, even by a few days
  • Exposure sits near or above the limit for several months
  • The customer asks for a higher limit or longer terms
  • A credit insurer reduces or cancels its limit on the buyer
  • A change of owner, key directors or bank
  • News of layoffs, lawsuits, lost contracts or supplier disputes
  • Sanctions, currency controls or political events in the customer's country
  • Cheques returned, partial payments without explanation, or new disputes raised only after invoices fall due

Be careful with financial statements as review evidence. They describe the past, and in some places they say very little. In the UK, for example, small companies can file abridged accounts with Companies House and can choose not to file their profit and loss account at all. A thin public filing is normal for a small company. It is not proof of strength.

How to raise a credit limit

Raise limits on evidence, not on pressure. A useful public model comes from the Export-Import Bank of the United States. Its brochure on extending credit under a multi-buyer policy describes a "ledger" approach: you can extend credit up to twice the highest amount the buyer has repaid promptly over the last 12 months, up to the policy maximum. Prompt payment there means every payment within 60 days of the due date.

Two details in that brochure are worth copying even if you have no EXIM policy:

  • Only similar history counts. Shipments made on secured terms, such as letters of credit or documents against payment, can only justify more secured shipments. Open account history is needed to justify open account credit. A customer that has paid ten LCs on time has shown its bank can pay against documents. It has not yet shown how it pays you unsecured.
  • Past-due balances block increases. Under the brochure's rules, discretionary limits cannot be used if the buyer is already more than 60 days past due on an invoice over $10,000. Your own threshold may differ, but the logic holds: do not raise a limit for a customer that owes you old money.

Before any increase, check three things. Has the customer paid on time at the current limit for at least a few cycles? Do references from other suppliers show the same pattern? Is the extra limit for real extra buying, or is the customer using you to fund a cash shortage?

How to reduce or suspend a credit limit

Cutting a limit feels like bad service. Often it is the opposite. A smaller limit with fast, clear communication can keep an account trading while a problem is worked out. Waiting usually means you find out at the same time as every other creditor.

A calm process:

1. Check the facts first. Is the late payment a dispute about one shipment, a bank delay, or a pattern? One late invoice with a clear reason is different from slower payments across the whole account.

2. Talk to the customer. Ask what is happening. A customer under pressure that tells you early is a better risk than one that goes quiet.

3. Decide the new limit. Cut it to a level you would be comfortable losing, often close to current exposure, so no new risk is added.

4. Change terms, not only the limit. Options include shorter terms, a deposit on new orders, shipping only once the oldest invoice is paid, or moving to a letter of credit or cash in advance for a period.

5. Put it in writing. State the new limit, the new terms, what the customer needs to do and when you will look again.

6. Set a review date. A cut is not a permanent judgement. If payments return to normal, restore the limit step by step.

If a credit insurer cuts its limit on a buyer, take it seriously. The insurer may be seeing payment data from many suppliers. Find out whether your shipments already made are still covered under your policy terms, and adjust your own limit before shipping more.

When you are the buyer

The same thinking applies in reverse. When you pay a supplier a deposit or advance before goods ship, you are giving that supplier credit. Set a ceiling on total prepayments to any one supplier, count all open deposits against it, and raise it only after orders arrive on time and to specification. Our guide to verifying an overseas supplier before you pay a deposit covers the checks to run first.

A worked example

The company and figures below are made up to show the method.

A food ingredients exporter is asked by a distributor in another country for a $200,000 limit on net 60 terms. The distributor expects to buy about $45,000 a month. Payments in that market usually run about 15 days late.

  • Needs-based: $45,000 x 75 / 30 = $112,500. With a 1.3 buffer, about $146,000.
  • Net worth: Latest accounts, 14 months old, show net worth of $1.1 million. At 10 percent, about $110,000.
  • Working capital: About $600,000, but falling over two years.
  • Trade references: Three suppliers give limits of $40,000, $60,000 and $75,000, on net 30 to net 60. Average days beyond terms is about 12.
  • Credit insurer: Approves $100,000 on the buyer.

The figures point to about $100,000 to $110,000, not $200,000. The request is nearly twice the largest limit any other supplier gives.

The exporter sets an open account limit of $100,000, matching the insured limit. To cover the rest of the distributor's buying, it ships the extra volume on a letter of credit. It also asks for updated management accounts within 90 days, because the filed accounts are old. The review date is six months out. If the distributor pays within 15 days of due date for that period and the new accounts hold up, the exporter can ask the insurer for a higher limit and move part of the LC volume to open account.

Common mistakes

  • Setting the limit to the request. The customer's ask is a starting point for discussion, not a figure to approve.
  • Ignoring work in progress. Custom goods in production are exposure.
  • Lengthening terms without touching the limit. Longer terms mean more money owed at any one time.
  • Using old financial statements as current. Ask for management accounts when filed accounts are more than a year old.
  • Raising limits by email with no record. Every change should have a reason, an approver and a date.
  • Never cutting a limit. Limits that only go up are not being reviewed.

How TradeRepute fits

Setting a limit is your decision. TradeRepute does not make it for you, and it is not a credit bureau. It does not produce credit reports, credit ratings or suggested limits. What it adds is one input that is often missing from a limit review: how a company behaves with real trading partners, described in trade references from verified businesses, backed by commercial documents, that the company did not choose.

Read references as opinions, check their dates and see whether several tell the same story. Then weigh them alongside financials, payment history and your own experience. Our review standards and how verification works pages explain how references are checked, and the counterparty due diligence checklist turns the wider review into a routine you can repeat.

Disclaimer

Business-to-business trade references for due-diligence purposes only. Not a credit report, credit rating or legal, financial or investment advice. References are the opinions of verified reviewers. Reviewers are anonymous to the public and the reviewed company. Evidence is reviewed but accuracy is not guaranteed; companies may dispute a reference privately.

  • credit limits
  • trade credit
  • credit underwriting
  • accounts receivable
  • export credit insurance